Feature
1、Stick around stove or glass, keep wall clean.
2、When film absorbs heavy oil, just remove it; tile wall remains clean.
3、Light glue design, easy to stick or peel off.
4、Can be cut for different sizes.
5、Strong soot absorbing, suitable for heavy soot area, such as dining room, kitchen.
6、Made of anti-bacteria material, effectively resist the harmful microorganism's breeding and           spread. Provide a safe and healthy environment to you.

Using instruction:
1、Soot, dirt or fingerprints left on tile wall will lower film adhesion.
2、To push air aside and stick easily, film adhesion is designed to lift slowly. Do not touch until          sticking firm.
3、Change film in a year. If sticking too long, glue might leave on the wall.
4、Although film is made of fire retarded material, please avoid nearing fire.

Application method
1、Clean wall surface, make sure no soot or dust.
2、Use film reverse side to measure wall size required to cover, then cut proper size you need. (Be   sure to measure from the edge with label. Please don't cut label away).
3、Moisten wall with a wet sponge or a sprayer (When sticking or adjusting film, wall must be wet).
4、Hold films, peel a corner of blue release film on the back side as picture, make sure right angle     with proper horizontal & vertical directions, then press.
5、Slowly peel off blue release film on the back side, press film  with a dry rag to push out all the air and stick inch by inch. Lastly use  plastic slice attached to press film again to make sure no water or air under.